HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 512

2 Note: Enter commands in lowercase only; mixed case is for readability. portLogClear portLogClear Clears the port log. Synopsis portlogclear Description Use this command to clear the port log. You might want to clear the port log before triggering an activity so that the log displays only the log events related to that activity. If the port log is disabled, portLogClear enables it. The port log is disabled automatically when certain errors occur in order to allow the collection of all the information needed to understand the cause of the error. When the port log is disabled, the events already present in the log are preserved, but new events are not collected. The following errors disable the port log: FCPH, EXCHBAD FCPH, EXCHFREE NBFSM, DUPEPORTSCN UCAST, RELICPDB Refer to the Fabric OS Message Reference for more information. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples none To clear the port log: switch:admin> portlogclear switch:admin> portlogshow port log is empty See Also portLogDump, portLogShow 2-478 Fabric OS Command Reference Manual Publication Number: 53-1000240-01