HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 571

Note: Enter commands in lowercase only; mixed case is for readability. portZoneShow 2 portZoneShow Displays the enforced zone type of the F/FL-ports of a switch. Synopsis portzoneshow Description Use this command to display the enforced zone type of the F/FL-ports of a switch. Output shows virtual port number (decimal), physical port number (decimal), online status (and if online, port type). If the current zone configuration has been diabled by cfgDisable, the fabric is in nonzoning mode, in which all devices see each other. When default zoning is enabled with "No Access" mode, "No Effective configuration: (No Access)" is displayed. Note This command requires a Brocade Advanced Zoning license. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples none To display the zone membership information of ports: switch:user> portzoneshow [OUTPUT TRUNCATED] PORT: 160 (160) Offline PORT: 161 (161) Offline PORT: 162 (162) Offline PORT: 163 (163) Offline PORT: 164 (164) Offline PORT: 165 (165) Offline PORT: 166 (166) Offline PORT: 167 (167) Offline PORT: 168 (168) FL-Port 0x4332000a PORT: 169 (169) Offline PORT: 170 (170) Offline PORT: 171 (171) Offline PORT: 172 (172) Offline PORT: 173 (173) Offline PORT: 174 (174) Offline PORT: 175 (175) Offline PORT: 176 (176) F-Port 0x4342002a PORT: 177 (177) Offline PORT: 178 (178) Offline PORT: 179 (179) Offline PORT: 180 (180) Offline [OUTPUT TRUNCATED] Enforcement: HARD WWN defaultHard: 0 IFID: Enforcement: HARD WWN defaultHard: 0 IFID: See Also cfgShow, switchShow Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-537