HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 770

2 Note: Enter commands in lowercase only; mixed case is for readability. zoneCreate When secure mode is enabled, this command can be issued only from the primary FCS switch. Operands Examples The following operands are required: "zonename" Name for a zone to be created, in quotation marks. Quotation marks are optional. This name cannot be used for any other zone object. Zone names are limited to 64 characters. "member" List of members to be included in zone, in quotation marks, separated by semicolons. Quotation marks are required. Can be one or more of the following: • A switch domain and port area number pair: for example, "2, 20". View the area numbers for ports using the switchShow command. • World Wide Names. • QuickLoop AL_PAs. • Zone alias names. To create three zones using a combination of port numbers and zone aliases: sw5:admin> zonecreate "Red_zone", "1,0; loop1" sw5:admin> zonecreate "Blue_zone", "1,1; array1; 1,2; array2" sw5:admin> zonecreate "Green_zone", "1,0; loop1; 1,2; array2" See Also zoneAdd, zoneDelete, zoneRemove, zoneShow 2-736 Fabric OS Command Reference Manual Publication Number: 53-1000240-01