HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 731

Note: Enter commands in lowercase only; mixed case is for readability. timeout 2 timeout Sets or displays the idle timeout value for a login session. Synopsis timeout [timeval] Description Use this command with out an operand to display, in minutes, the current timeout value after which idle logins are automatically terminated. Use this command with the timeval operand to set the login timeout value to the specified interval. A value of 0 disables timeout functionality of login sessions. Note The new timeout value is only applied to subsequent logins. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples This command has the following operand: timeval Specify the number of minutes for the telnet timeout value. Valid values are 1 to 99,999, or 0 to disable login timeouts. This operand is optional; if omitted, the command displays the current timeout value. To set the idle timeout to 10 minutes: switch:admin> timeout 10 IDLE Timeout Changed to 10 minutes The modified IDLE Timeout will be in effect after NEXT login See Also none Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-697