HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 607

Note: Enter commands in lowercase only; mixed case is for readability. secPolicyAdd 2 "member" capitalized like regular policy names, but they are case sensitive. When the switch is in non-secure mode this command may be used to manage only SCC and DCC policies. Specify a list of member switches for the security policy. The members must be enclosed in quotation marks and separated by semicolons. Depending on the policy type, members can be specified using IP address, WWN, domain, switch name, or other. IP Address Member Policy Types The following policy types require members be specified by IP address: • TELNET_POLICY • HTTP_POLICY • API_POLICY • RSNMP_POLICY • WSNMP_POLICY These policy types require member IPs to be specified in dot notation (for example, 124.23.56.122). If 0 is specified in one of the octets, any number can be matched. WWN Member Policy Types The following policy types require members be specified by WWN address: • FCS_POLICY • SES_POLICY • MS_POLICY • SERIAL_POLICY • FRONTPANEL_POLICY • SCC_POLICY These policy types require members be specified as WWN strings, domain IDs, or switch names. If domain ID, or switch names are used, the switches associated must be present in the fabric or the command fails. DCC_POLICY Members The DCC_POLICY_nnn is a list of devices associated with a specific switch and port combination. An empty DCC_POLICY does not stop access to the switch. The device is specified with a WWN string. The switch and port combination must be in the following format: can be specified using WWN, domain, or switch name. can be specified by port numbers separated by commas and enclosed in either brackets or parenthesis; for example, (2, 4, 6). Ports enclosed in brackets will include the devices currently attached to those ports. The following examples illustrate several ways to specify the port values: Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-573