HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 617

Note: Enter commands in lowercase only; mixed case is for readability. secPolicyFCSMove 2 secPolicyFCSMove Moves a member in the FCS policy. Synopsis secpolicyfcsmove [from, to] Description Use this command to move an FCS member from one position to another in the FCS list. Only one FCS can be moved at a time. The first FCS switch in the list that is also present in the fabric is the primary FCS. If no parameters are specified, the command becomes interactive, prompting you to supply valid values for the operands. Note If a backup FCS is moved to the first position, it becomes the primary FCS after activation. Note This command can only be issued in secure mode and only from the primary FCS switch. Operands Examples This command has the following operands: from Specify the position of the FCS switch you want to move. to Specify the position to which you want to move the FCS switch. If no operand is specified, the command becomes interactive and you are prompted for values. To move the backup FCS switch at position 2 to position 3 in the FCS list: switch:admin> secpolicyfcsmove Pos Primary WWN DId swName. 1 Yes 10:00:00:60:69:10:02:18 1 switch5. 2 No 10:00:00:60:69:00:00:5a 2 switch60. 3 No 10:00:00:60:69:00:00:13 3 switch73. Please enter position you'd like to move from : (1..3) [1] 2 Please enter position you'd like to move to : (1..3) [1] 3 DEFINED POLICY SET FCS_POLICY Pos Primary WWN DId swName 1 Yes 10:00:00:60:69:10:02:18 1 switch5. 2 No 10:00:00:60:69:00:00:13 3 switch73. 3 No 10:00:00:60:69:00:00:5a 2 switch60. See Also secFabricShow, secPolicyAbort, secPolicyActivate, secPolicyAdd, secPolicyCreate, secPolicyDelete, secPolicyDump, secPolicyRemove, secPolicySave, secPolicyShow Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-583