HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 130

2 Note: Enter commands in lowercase only; mixed case is for readability. configure configure Changes system configuration settings. Synopsis configure Description Use this command to change the following system configuration settings for the switch: • "Switch Fabric Settings" • "Virtual Channel Settings" • "F_Port Login Parameters" • "Zoning Operation Parameters" • "RSCN Transmission Mode" • "Arbitrated Loop Parameters" • "System Services Settings" • "Portlog Events Enable/Disable Settings" • "Application Attributes" Note If executed on an enabled switch, only the application attribute can be configured. To access all parameters controlled by this command, you must disable the switch using the switchDisable command. Note The execution of this command is subject to Admin Domain restrictions that may be in place. The configure command is navigated using a series of hierarchical menus. Each top-level menu and its associated submenus consist of a text prompt, a list of acceptable values, and a default value (in brackets). Use the following options to control input: Return When entered at a prompt with no preceding input, accepts the default value (if applicable) and moves to the next prompt. Interrupt (Ctrl-C) Aborts the command immediately and ignores all changes made. End-of-file (Ctrl-D) When entered at a prompt with no preceding input, terminates the command and saves changes made. Switch Fabric Settings There are several settings that control the overall behavior and operation of the fabric. Some of these, such as the domain, are assigned automatically by the fabric and might differ from one switch to another in the fabric. Other parameters, such as the BB credit or the timeout values, can be changed for specific applications or operating environments but must be in agreement among all switches to allow formation of the fabric. 2-96 Fabric OS Command Reference Manual Publication Number: 53-1000240-01