HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 437

Note: Enter commands in lowercase only; mixed case is for readability. perfClearEEMonitor 2 perfClearEEMonitor Clears statistics counters of an end-to-end performance monitors. Synopsis perfcleareemonitor [slotnumber/]portnumber [monitorId] Description Use this command to clear statistics counters for all end-to-end performance monitors on a port, or an end-to-end monitor associated with a specific monitorId. Issuing portStatsClear on a port also results in all end-to-end monitors clearing. Note This command requires a Brocade Advanced Performance Monitoring license. This command is deprecated; use perfMonitorClear instead. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples This command has the following operands: slotnumber For bladed systems only, this operand specifies the slot number of the port on which the monitor is to be cleared, followed by a slash (/). portnumber Specifies the number of the port on which the monitor is to be cleared, relative to its slot for bladed systems. Use switchShow for a list of valid ports. monitorId Specify the monitor number to clear. Monitor numbers are defined when created and can be displayed using perfShowEEMonitor. This operand is optional. If not specified, all monitor counters on the port are cleared. . To clear statistics counters for an end-to-end monitor: switch:admin> perfcleareemonitor 1/2 5 End-to-End monitor number 5 counters are cleared switch:admin> perfcleareemonitor 1/2 This will clear ALL EE monitors' counters on port 2, continue? (yes, y, no, n): [no] y See Also perfAddEEMonitor, perfShowEEMonitor Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-403