HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 389

Note: Enter commands in lowercase only; mixed case is for readability. msTdEnable 2 msTdEnable Enables the Management Server (MS) topology discovery service. Synopsis mstdenable ["ALL"] Description Use this command to enable the MS topology discovery service on a local switch or on the entire fabric. This command enables the MS Topology Discovery Service. This change takes effect immediately and commits to the configuration database for all affected switches. If the operand "ALL" is used, this command attempts to enable the MS topology discovery service on all switches in the fabric. Note When security is enabled, and using the "ALL" operand, this command can be issued only from the primary FCS switch. This command is supported only in AD0 and AD255 contexts. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Limitations Operands Examples Topology Discovery Management requires the attached devices which include attached switches to support RNID ELS. This command has the following operand: "ALL" Enables the MS topology discovery service throughout the entire fabric. This operand is optional. To enable the MS topology discovery service on the local switch only: switch:admin> mstdenable Request to enable MS Topology Discovery Service in progress.... done. *MS Topology Discovery enabled locally. To enable MS topology discovery on all the switches in the fabric: switch:admin> mstdenable "ALL" Request to enable MS Topology Discovery Service in progress.... done. *MS Topology Discovery enabled locally. *MS Topology Discovery Enable Operation Complete!! See Also msTdDisable, msTdReadConfig Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-355