HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 66

2 Note: Enter commands in lowercase only; mixed case is for readability. auditCfg auditCfg Modifies and displays audit log filter configuration. Synopsis auditcfg[--class audit_class][--show][--enable][--disable] Description Use this command to configure and display the audit log configuration. This command allows user to set filters by configuring certain classes using the --class option. To add or remove any of the classes in the filter list, re-issue -class option. All filters can be disabled by the -disable option. Based on the configuration, certain classes are logged to syslog for auditing. Syslog configuration is required for logging audit messages. The command syslogdIpAdd can be used to add the syslogd server IP address. Option [--class] allows 1-ZONE, 2-SECURITY, 3-CONFIGURATION, 4-FIRMWARE and 5FABRIC filters. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Examples To configure the audit log filter, disable audit logging, and show the configuration switch:admin> auditcfg --class 2,3 Audit filter is configured. switch:admin> auditcfg --disable Audit filter is disabled. switch:admin> auditcfg --show Audit filter is disabled. 2-SECURITY 3-CONFIGURATION See Also none 2-32 Fabric OS Command Reference Manual Publication Number: 53-1000240-01