HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 274

2 Note: Enter commands in lowercase only; mixed case is for readability. fosConfig and try the command again. • "FC Routing service is already disabled" - This means that the FC Routing service is already disabled. Use switchShow to display the current state of the FC Routing service. • iSCSI The iSCSI service will be disabled on this switch. This command can be run while the switch state is "online". • iSNSC The iSNSC service will be disabled on this switch. This command can be run while the switch state is "online". --show Displays the current operating status of features on the switch. Note The features shown here may not be supported on all platforms. If you attempt to enable a feature that is not supported on your platform, an error message stating "Command not supported on this platform" is displayed. Examples To display the status of the features: switch:admin> fosconfig --show FC Routing service: iSCSI service: iSNS Client service: enabled enabled disabled To disable the FC Routing service: switch:admin> fosconfig --disable fcr FC Routing service is disabled To enable the FC Routing service: switch:admin> fosconfig --enable fcr FC Routing service is enabled To enable the iSCSI service: switch:admin> fosconfig --enable iscsi iSCSI service is enabled To disable the iSCSI service: switch:admin> fosconfig --disable iscsi iSCSI service is disabled See Also fcrConfigure, iscsiCfg, iscsiPortCfg, isnscCfg, switchShow 2-240 Fabric OS Command Reference Manual Publication Number: 53-1000240-01