HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 351
isnscCfg, Synopsis, Description, Operands, Examples
View all HP StorageWorks 2/16V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 351 highlights
Note: Enter commands in lowercase only; mixed case is for readability. isnscCfg 2 isnscCfg iSNS Client Configure. Synopsis isnsccfg --set slot/geport -s server_ip isnsccfg --set -m -s server_ip isnsccfg --reregister isnsccfg --show Description Use this command to display and update the configuration state of the iSNS client daemon. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples This command has the following operands: --set Sets the iSNS server to peer with. --show Displays the current iSNS client configuration. --reregister Triggers a re-registration of iSNS objects. -h Displays help. -m Specify the iSNS server is attached to the management port. slot/geport Specifies the slot number of an iSCSI blade in a chassis and the port number of a GbE port in an iSCSI blade. NOTE: This parameter only supports FC4-16IP blades in SilkWorm 48000 directors. --s server_ip Specifies the IP address in dotted-decimal form. To set the IP address of the iSNS server (GbE port attached): switch:admin> isnsccfg --set 7/ge0 -s 192.168.131.124 iSNS client configuration updated: peering with iSNS server 192.168.131.124 on slot 7, port ge0 To set the IP address of the iSNS server (Management port attached) switch:admin> isnsccfg --set -m -s 192.168.131.124 iSNS client configuration updated: peering with iSNS server 192.168.131.124 on the management port To display the current configuration of the iSNS client daemon switch:admin> isnsccfg --show iSNS client is peering with iSNS server 192.168.131.124 on slot 7, port ge0 Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-317