HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 159

Note: Enter commands in lowercase only; mixed case is for readability. diagLoopId 2 diagLoopId Sets the diagnostics loop ID. Synopsis diagloopid [id | -show] Description Use this command to select the loop ID to be used by FL mode diagnostics. The value entered will be converted from a loop ID to the corresponding AL_PA and used as the port address for any diagnostics that operate in FL_Port mode. The mode becomes active as soon as this command is executed; it does not require a reboot to take effect. The actual behavior of diagLoopId depends on the test methods that use it. Note Currently, no FL mode tests exist. You can issue this command on the FR4-18i blade in a SilkWorm chassis; however, the command is not supported by the SilkWorm platform and does not effect any other feature operations. This availability is offered to maintain consistency across a mixed-blade environment. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples This command has the following optional operands: id Specify the loop ID for FL_Port mode diagnostics. -show Specify -show to display the current loop ID. If no operand is specified, the current value is displayed. To display the loop ID: switch:admin> diagloopid -show FL mode Loop ID is 125. See Also none Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-125