HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 641

Note: Enter commands in lowercase only; mixed case is for readability. setVerbose 2 setVerbose Specifies module verbose level. Synopsis setverbose [module_name][level] Description Use this command to set the verbose level of the specified module. These levels filter the display of the debug message to the serial console. By default, no debug messages are displayed. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples This command has the following operands: module_name Specify the name of the module for which verbose level is to be set; module names are case sensitive. level Specify the verbose level (0 to 9). To set the verbose level of module named NS to value 3: switch:admin> setverbose NS 3 switch:admin> dbgshow NS Module NS, debug level = 0, verbose level = 3 See Also dbgShow, setDbg Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-607