HP StorageWorks 2/16V Brocade Fabric OS Command Reference Manual (53-1000240-0 - Page 226

2 Note: Enter commands in lowercase only; mixed case is for readability. fcrConfigure fcrConfigure Sets FC Router configuration parameters. Synopsis fcrconfigure Description Use this command to configure the FC Router parameters for this platform. This is an interactive command. This command cannot execute on a system with the FC Router feature enabled. First disable FC routing by using either fcrDisable or switchDisable. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples This command has the following parameter: Backbone Fabric ID A fabric ID uniquely identifies a fabric in FC Router configurations. The backbone fabric is the fabric attached to the U_Ports-for example, E/F_Ports- of this switch. The backbone fabric ID must be unique across all FC Routerconnected fabrics. To configure FC Router parameters: fcr:admin> fcrconfigure FC Router parameter set. to skip a parameter Backbone fabric ID: (1-128)[100] See Also fcrDisable, fcrEnable, switchDisable, switchEnable 2-192 Fabric OS Command Reference Manual Publication Number: 53-1000240-01