Yamaha 02R96 Owner's Manual - Page 108
Using Inserts, Use the SELECTED CHANNEL DISPLAY ACCESS [PHASE/INSERT] button
View all Yamaha 02R96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Using Inserts 95 Using Inserts Input Channels, Bus Outs, Aux Sends, and the Stereo Out all feature assignable Inserts. 1 Use the SELECTED CHANNEL DISPLAY ACCESS [PHASE/INSERT] button to select the Insert page. The Insert page for Input Channels is shown below. The Insert page for Bus Outs, Aux Sends, and the Stereo out is shown below. 2 Use the LAYER buttons to select Layers, and use the [SEL] buttons to select channels. 3 Use the cursor buttons to select the parameters, and use the Parameter wheel, INC/DEC buttons, and [ENTER] button to set them. INSERT ON/OFF: This turns the currently selected channel's Insert on and off. INSERT POSITION: This determines the position of the Insert within the channel, and can be set to pre-EQ, pre-fader, or post-fader. INSERT OUT: This selects the destination for the Insert Out, which can be a Slot Output, Omni Out, 2TR Digital Output, or the input to an internal effects processor. See page 204 and page 208 for Input and Output patch parameter lists. The Port ID of the currently selected destination is displayed below the currently selected channel's Long name in the upper-right corner of the page. The destination port can also be selected by using the Patch Select window (see page 57), which is accessed by pressing [ENTER] while this parameter is selected. Insert Outs can also be patched on the Output Patch pages. See "Output Patching" on page 54 for more information. INSERT IN: This selects the source for the Insert In, which can be an AD Input, Slot Input, 2TR Digital or Analog Input, or the output of an internal effects processor. See page 204 for a list of Input Channel Insert In sources; page 208 for a list of Output Channel Insert In sources. The Port ID of the currently selected source is displayed below the currently 02R96-Owner's Manual