Yamaha 02R96 Owner's Manual - Page 299

286 Appendix C: MIDI Refer to the above table for the Functions and Numbers. STATUS 11110000 F0 System exclusive message ID No. 01000011 43 Manufacture's ID number (YAMAHA) SUB STATUS 0011nnnn 3n n=0-15 (Device number=MIDI Channel) GROUP ID 00111110 3E MODEL ID (digital mixer) MODEL ID 00000110 7F Universal ADDRESS 00010000 10 Function call Library 0100aaaa 4a Address UL (function) 0nnnnnnn nn Address LU (number H) 0nnnnnnn nn Address LL (number L) EOX 11110111 F7 End of exclusive 12.3.17 Parameter change (Function call: Scene/Library Clear) Reception This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS. This is echoed if [Parameter change ECHO] is ON. When this is received, the specified memory/library will be stored/recalled. Transmission If [Parameter change ECHO] is ON, this message will be retransmitted without change. STATUS 11110000 F0 System exclusive message ID No. 01000011 43 Manufacture's ID number (YAMAHA) SUB STATUS 0001nnnn 1n n=0-15 (Device number=MIDI Channel) GROUP ID 00111110 3E MODEL ID (digital mixer) MODEL ID 00000110 7F Universal ADDRESS 00010000 10 Function call Library 0110aaaa 6a Address UL (function) 0nnnnnnn nn Address LU (number H) 0nnnnnnn nn Address LL (number L) EOX 11110111 F7 End of exclusive function SCENE LIB CLEAR EQ LIB CLEAR GATE LIB CLEAR COMP LIB CLEAR EFF LIB CLEAR CHANNEL LIB CLEAR INPATCH LIB CLEAR OUTPATCH LIB CLEAR Bus to Stereo LIB CLEAR Surround Monitor LIB CLEAR AUTOMIX LIB CLEAR 0x60 0x61 0x62 0x63 0x64 0x66 0x67 0x68 0x69 0x6A 0x6B number 1-99 41-200 5-128 37-128 1-128 2-128 0-32 0-32 0-32 0-32 1-16 12.3.18 Parameter change (Function call: pair, copy) Reception This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS. This is echoed if [Parameter change ECHO] is ON. When this is received, pairing will be enabled/disabled for the specified channel. (Items other than PAIR are reserved for future use.) STATUS 11110000 F0 System exclusive message ID No. 01000011 43 Manufacture's ID number (YAMAHA) SUB STATUS 0001nnnn 1n n=0-15 (Device number=MIDI Channel) GROUP ID 00111110 3E MODEL ID (digital mixer) MODEL ID 00000110 7F Universal ADDRESS 00010001 11 Function call Pair 0000aaaa 0a Function DATA 0ddddddd dd Source channel number H 0ddddddd dd Source channel number L 0ddddddd dd Destination channel number H 0ddddddd dd Destination channel number L EOX 11110111 F7 End of exclusive function PAIR ON with COPY PAIR ON with RESET BOTH PAIR OFF 0x00 0x01 0x02 Channel *1) *1) *1) *1)0:CH1 - 55:CH56, 128:BUS1 - 135:BUS8, 256:AUX1 263:AUX8, 512:STEREO L - 513:STEREO R Effect is 0:Effect 1-3:Effect 4 In the case of PAIR, you must specify channels for which pairing is possible. In the case of PAIR ON with COPY, you must specify Source Channel as the copy source, and Destination Channel as the copy destination. 12.3.19 Parameter change (Function call Event: Effect) Reception This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS. This is echoed if [Parameter change ECHO] is ON. When this is received, the corresponding effect's function activates (depending on the effect type). STATUS ID No. SUB STATUS GROUP ID MODEL ID ADDRESS DATA EOX 11110000 F0 01000011 43 0001nnnn 1n 00111110 3E 00000110 7F 00010010 12 0000aaaa 0a 00000000 00 0ddddddd dd 00000000 00 0ddddddd dd 11110111 F7 System exclusive message Manufacture's ID number (YAMAHA) n=0-15 (Device number=MIDI Channel) MODEL ID (digital mixer) Universal Function call Event Function Release:0, Press:1 Destination Effect Number 0 - 7 End of exclusive function Freeze Play button Freeze Record button Auto Pan 5.1 Trigger Button Auto Pan 5.1 Reset Button 0x00 0x01 0x02 0x03 Channel 0:Effect1-3:Effect4 0:Effect1-3:Effect4 0:Effect1 0:Effect1 • This does not activate when the effect type is different. 12.3.20 Parameter change (Key remote) Reception This is received if [Parameter change RX] is ON and the [Rx CH] matches the device number included in the SUB STATUS. This is echoed if [Parameter change ECHO] is ON. When this is received, the same processing that is executed when the key specified by Address is pressed (released). (Refer to the PARAMETER CHANGE PARAMETER NUMBER LIST.) Transmission If [Parameter Change ECHO] is ON, this message is retransmitted without change. STATUS ID No. SUB STATUS GROUP ID MODEL ID ADDRESS DATA EOX 11110000 F0 01000011 43 0001nnnn 1n 00111110 3E 00001011 0B 00100000 20 0aaaaaaa aa 0aaaaaaa aa 0aaaaaaa aa 0ddddddd dd 11110111 F7 System exclusive message Manufacture's ID number (YAMAHA) n=0-15 (Device number=MIDI Channel) MODEL ID (digital mixer) 02R96 Address UU Address UL Address LU Address LL 0:press, 1:release End of exclusive 12.3.21 Parameter change (Remote Meter) When transmission is enabled by receiving a Request of Remote meter, the specified meter information is transmitted every 50 msec for 10 seconds. When you want to transmit meter information continuously, a Request must be transmitted continuously within every 10 seconds. Reception This is echoed if [Parameter change ECHO] is ON. Transmission When transmission has been enabled by a Request, the parameter specified by Address (see PARAMETER CHANGE PARAMETER NUMBER LIST) will be transmitted on the [Rx CH] channel at 50 msec intervals for a duration of 10 seconds. Transmission will be disabled if the power is turned off and on again, or if the PORT setting is changed. If [Parameter Change ECHO] is ON, this message is retransmitted without 02R96-Owner's Manual