Yamaha 02R96 Owner's Manual - Page 195
Assigning Inserts/Plugins, Press the EFFECTS PLUG-INS [CHANNEL INSERTS] button.
View all Yamaha 02R96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
182 Chapter 18-Pro Tools Remote Layer Assigning Inserts/Plug-ins Inserts can be assigned to channels as follows. The Pro Tools transport must be stopped in order to make these assignments. 1 Press the EFFECTS PLUG-INS [CHANNEL INSERTS] button. Its indicator lights up and the [SEL] buttons are set to Insert Select mode. 2 Use the [SEL] buttons to select channels for insert assignment. The name of the selected channel appears in the INSERT/PARAM section of the display. The border of the corresponding channel name in the Pro Tools Mix window is highlighted red. 3 Press the EFFECTS/PLUG-INS [1] (ASSIGN) button. Its indicator flashes, as does the ASSIGN indicator on the display. 4 Use Parameter controls 1-4 to select inserts/plug-ins. The names of the inserts/plug-ins appear on the display in abbreviated form. When you select an insert/plug-in other than the current, the corresponding SEL button flashes on the display. 5 To confirm your selection, press the relevant Parameter control's push-switch. The SEL button stops flashing. While the EFFECTS/PLUG-INS [1] (ASSIGN) button indicator is still flashing, you can assign more inserts/plug-ins to the same channel. To set insert #5, press the Parameter Down (SCROLL >) button. Press the Parameter Up (< SCROLL) button to view inserts 1-4 again. To assign inserts/plug-ins to other channels, use the [SEL] buttons to select them. You'll need to press the EFFECTS/PLUG-INS [1] (ASSIGN) button each time you select another channel. You can cancel this function by pressing the [DEC] (ESC) button. 02R96-Owner's Manual