Yamaha 02R96 Owner's Manual - Page 53

40 Chapter 4-Analog I/O & the AD Input Section AD Inserts (AD 1-16) AD Inputs 1 through 16 feature switchable analog inserts on 1/4-inch TRS phone jacks for the send and return signals. They are wired: sleeve-ground, ring-return, tip-send. The nominal signal level is +4 dB. OFF ON INSERT AD Input inserts can be turned on and off individually by using the INSERT ON/OFF switches, so you don't have to disconnect your external equipment in order to remove an insert. Stereo Out See page 73 for information on the Stereo Out outputs. Control Room Monitor Out See page 114 for information on the Control Room Monitor output. Studio Monitor Out See page 115 for information on the Studio Monitor output. Omni Outs The 02R96 features assignable Omni Outs on balanced 1/4-inch TRS phone jacks. Omni Outs can be patched to Bus Outs, Aux Sends, the Stereo Out, Input or Output Channel Insert Outs, or Surround Monitor Channels (see page 55). In addition, Input Channel Direct Outs can be patched to the Omni Outs (see page 56). The maximum output level of each OMNI OUT can be set internally to either +4 dB (-10 dB operating level) or +18 dB (+4 dB operating level). Contact your dealer for further details. 2TR Analog INs The 02R96 features two sets of 2-track analog inputs: 2TR IN ANALOG 1 +4 dB (BAL) uses balanced 1/4-inch TRS phone jacks. 2TR IN ANALOG 2 -10 dBV (UNBAL) uses unbalanced phono connectors. These inputs can be monitored via the Control Room monitors by pressing the CONTROL ROOM [2TR A1] and [2TR A2] buttons. They can be patched to Input Channels (see page 52), Input Channel Insert Ins (see page 53), or Output Channel Insert Ins (see page 55). 02R96-Owner's Manual