Yamaha 02R96 Owner's Manual - Page 39
OMNI OUTs, Digital I/O & Control
View all Yamaha 02R96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
26 Chapter 2-Control Surface & Rear Panel OMNI OUTs, Digital I/O & Control Section 2 3 4 56 1 78 9 JKL M N O P A OMNI OUT +4dB (BAL) These balanced 1/4-inch TRS phone jacks, nominal output level +4 dB, provide eight analog outputs that can be patched to the following: Bus Outs, Aux Sends, the Stereo Out, Insert Outs, Direct Outs, or Surround Monitor Channels. See "Omni Outs" on page 40. 1/4" TRS phone plug Tip (hot) Ring (cold) Sleeve (ground) B SMPTE TIME CODE INPUT connector This balanced XLR-3-31-type connector is used to input SMPTE timecode for synchronizing the Automix function. See "Selecting the Timecode Source & Frame Rate" on page 152. C MTC TIME CODE INPUT connector This 5-pin DIN connector is used to input MTC for synchronizing the Automix function. See "Selecting the Timecode Source & Frame Rate" on page 152. D USB TO HOST port This USB port is for MIDI communication between the 02R96 and a host computer with a USB port. See "MIDI I/O" on page 163 for more information. E SERIAL TO HOST port This 8-pin mini DIN port is for MIDI communication between the 02R96 and a host computer with a serial port. See "MIDI I/O" on page 163 for more information. F 2TR OUT DIGITAL COAXIAL 2 & 3 These phono connectors output consumer format (IEC-60958) digital audio, and are typically connected to the digital stereo inputs of 2-track recorders. The following signals can be patched to these outputs: Stereo Out, Bus Outs, Aux Sends, Direct Outs, Insert Outs, and Control Room. Dither can be applied for digital audio transfer to lower-resolution systems. See "2TR Digital Outs" on page 43 for more information. G 2TR OUT DIGITAL AES/EBU 1 This XLR-3-32-type connector outputs AES/EBU format digital audio, and is typically connected to the digital stereo input of a 2-track recorder. The following signals can be patched to this output: Stereo Out, Bus Outs, Aux Sends, Direct Outs, Insert Outs, and Control Room. Dither can be applied for digital audio transfer to lower-resolution systems. See "2TR Digital Outs" on page 43 for more information. 02R96-Owner's Manual