Yamaha 02R96 Owner's Manual - Page 236

Effects Parameters 223 Effects Parameters REVERB HALL, REVERB ROOM, REVERB STAGE, REVERB PLATE One input, two output hall, room, stage, and plate reverb simulations, all with gates. Parameter Range Description REV TIME INI. DLY HI. RATIO LO. RATIO 0.3-99.0 s 0.0-500.0 ms 0.1-1.0 0.1-2.4 Reverb time Initial delay before reverb begins High-frequency reverb time ratio Low-frequency reverb time ratio DIFF. 0.0-1.0 Reverb diffusion (left-right reverb spread) DENSITY E/R DLY E/R BAL. HPF LPF GATE LVL 0-100% 0.0-100.0 ms 0-100% THRU, 21.2 Hz-8.00 kHz 50.0 Hz-16.0 kHz, THRU OFF, -60 to 0 dB Reverb density Delay between early reflections and reverb Balance of early reflections and reverb (0% = all reverb, 100% = all early reflections) High-pass filter cutoff frequency Low-pass filter cutoff frequency Level at which gate kicks in ATTACK 0-120 ms Gate opening speed HOLD 1 Gate open time DECAY 2 Gate closing speed 1. 0.02 ms-2.13 s (fs=44.1 kHz), 0.02 ms-1.96 s (fs=48 kHz), 0.01 ms-1.07 s (fs=88.2 kHz), 0.01 ms-980 ms (fs=96 kHz) 2. 6.0 ms-46.0 s (fs=44.1 kHz), 5.0 ms-42.3 s (fs=48 kHz), 3 ms-23.0 s (fs=88.2 kHz), 3 ms-21.1 s (fs=96 kHz) EARLY REF. One input, two output early reflections. Parameter Range Description TYPE ROOMSIZE S-Hall, L-Hall, Random, Revers, Plate, Spring 0.1-20.0 Type of early reflection simulation Reflection spacing LIVENESS INI. DLY 0-10 0.0-500.0 ms Early reflections decay characteristics (0 = dead, 10 = live) Initial delay before reverb begins DIFF. DENSITY 0.0-1.0 0-100% Reflection diffusion (left-right reflection spread) Reflection density ER NUM. FB GAIN 1-19 -100 to +100% Number of early reflections Feedback gain HI. RATIO HPF LPF 0.1-1.0 THRU, 21.2 Hz-8.00 kHz 50.0 Hz-16.0 kHz, THRU High-frequency feedback ratio High-pass filter cutoff frequency Low-pass filter cutoff frequency 02R96-Owner's Manual