Yamaha 02R96 Owner's Manual - Page 165
Selecting the Timecode Source & Frame Rate, TIME REFERENCE
View all Yamaha 02R96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
152 Chapter 16-Automix Selecting the Timecode Source & Frame Rate The timecode source and frame rate for Automix can be set as follows. 1 Use the DISPLAY ACCESS [SETUP] button to select the Time Reference page. 2 Use the cursor buttons to select the parameters, and use the Parameter wheel, INC/DEC buttons, and [ENTER] button to set them. TIME REFERENCE: The following timecode sources can be selected. Source INTERNAL SMPTE MIDI CLOCK MTC USB SERIAL SLOT1 MIDI Description Internally generated timecode SMPTE timecode received via the SMPTE TIME CODE INPUT MIDI Clock received via the MIDI IN port MTC received via the MTC TIME CODE INPUT MTC received via the USB TO HOST port MTC received via the SERIAL TO HOST port MTC received via Slot #1 (for use with an optional mLAN I/O Card installed in Slot #1) MTC received via the MIDI IN port For the USB, SERIAL, and SLOT1 sources, you must specify a port from 1-8. FRAMES: The frame rate can be set to: 30, 30D, 29.97, 29.97D, 25, or 24. An Automix will playback correctly even if the frame rate is different to that which was used when the Automix was originally recorded. The MIDI CLOCK source supports Song position Pointers, F8 TIMING CLOCK (timing info), FA START (starts Automix from beginning), FB CONTINUE (starts Automix from current position), and FC STOP (stops Automix). 02R96-Owner's Manual