Yamaha 02R96 Owner's Manual - Page 214
Initializing the 02R96, When the con - fader calibration
View all Yamaha 02R96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
Initializing the 02R96 201 Initializing the 02R96 The 02R96 can be initialized as follows. Warning: This procedure will clear all user memories and reset all settings to their initial values. You may want to back up any important data beforehand via MIDI Bulk Dump (see page 168). If you want to reset just the mix settings, recall scene memory #0 instead (see page 139). 1 Turn off the 02R96. 2 While holding down the SCENE MEMORY [STORE] button, turn on the 02R96. 3 When the confirmation message appears, release the SCENE MEMORY [STORE] button, select YES, and press [ENTER]. The following message is displayed while initialization is in progress: "Loading Factory Presets & Calibrating the Faders... Do Not Touch the Faders!" It's important that you do not touch the faders while this message is displayed, as the faders may not be calibrated correctly. The display returns to normal when initialization is complete. 02R96-Owner's Manual