Yamaha 02R96 Owner's Manual - Page 57
TR Digital Ins, 2TR In Sampling Rate Conversion
View all Yamaha 02R96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
44 Chapter 5-Digital I/O & Cascading 2TR Digital Ins The 02R96 features three sets of 2-track digital inputs: 2TR IN DIGITAL AES/EBU 1 uses an XLR-3-31-type connector and accepts AES/EBU format digital audio. 2TR IN DIGITAL COAXIAL 2 and 3 use phono connectors and accept consumer format (IEC-60958) digital audio. These inputs can be monitored via the Control Room monitors by using the CONTROL ROOM [2TR D1], [2TR D2], and [2TR D3] buttons. They can be patched to Input Channels (see page 52), Input Channel Insert Ins (see page 53), or Output Channel Insert Ins (see page 55). Digital audio signals received at sampling rates other than the current 02R96 rate can be converted by the internal sampling rate converters (see page 44). You can monitor the Channel Status of digital signals present at these inputs on the Channel Status Monitor page (see page 48). 2TR In Sampling Rate Conversion The 02R96's 2TR Digital Inputs feature sampling rate converters so you can easily connect your legacy 44.1/48 kHz digital audio equipment. 1 Use the DISPLAY ACCESS [DIO] button to locate the Sampling Rate Converter page. 2 Use the cursor buttons to select the parameters, and use the Parameter wheel, INC/DEC buttons, or [ENTER] button to set them. The FS box in the lower-left corner displays the current wordclock status: 44.1kHz, 48kHz, 88.2kHz, 96kHz, or Unlock. 2TR IN D1-3: These buttons are used to turn on and off the sampling rate converter for each 2TR Digital Input. When on, the sampling rate of the received digital audio is converted to the 02R96's current sampling rate. The original sampling rate is displayed. 02R96-Owner's Manual