Yamaha 02R96 Owner's Manual - Page 182
Pro Tools Remote Layer, Configuring Windows Computers, Configuring Macintosh Computers, - drivers
View all Yamaha 02R96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
Pro Tools Remote Layer 169 18 Pro Tools Remote Layer The 02R96 features a Remote Layer target especially designed for controlling Pro Tools. If an optional MB02R96 Peak Meter Bridge is installed, Pro Tools channel levels are displayed on its meters. Configuring Windows Computers 1 Connect your PC. The 02R96 can be connected to your Windows PC by connecting the TO HOST SERIAL port to a suitable RS232 serial port on your PC, or by connecting the TO HOST USB port to a USB port on your PC. If you use the TO HOST SERIAL port, make sure that the TO HOST SERIAL parameter on the MIDI/TO HOST Setup page is set to PC-2 (see page 164). 2 Install the necessary drivers. Once your PC is connected, you'll need to install the TO HOST SERIAL or TO HOST USB drivers included on the 02R96 CD-ROM. Configuring Macintosh Computers 1 Connect your Mac. The 02R96 can be connected to your Mac by connecting the TO HOST SERIAL port to either the Printer or Modem port on your Mac, or by connecting the TO HOST USB port to a USB port on your Mac. If you use the TO HOST SERIAL port, make sure that the TO HOST SERIAL parameter on the MIDI/TO HOST Setup page is set to Mac (see page 164). 2 Install OMS. The 02R96 communicates with Pro Tools via OMS (Open Music System) software. If you already have OMS installed on your Mac, there's no need to install it again and you can move on to the next section. If you don't already have OMS installed, it's included on the 02R96 CD-ROM. Refer to the OMS documentation included on the 02R96 CD-ROM for more information on installing. 3 Install Yamaha USB MIDI driver 1.04 or later. If you are using the TO HOST USB port, you must also install the Yamaha USB MIDI driver included on the 02R96 CD-ROM. See the included documentation for more information. Configuring the 02R96 1 Use the DISPLAY ACCESS [SETUP] button to locate the MIDI/TO HOST Setup page, and use the DAW parameter to specify the port to which Pro Tools is connected. See "MIDI Port Setup" on page 164 for more information. 2 Use the DISPLAY ACCESS [REMOTE] button to locate the Remote page, and set the target to Pro Tools. See "Assigning a Target to the Remote Layer" on page 189 for more information. 3 Use the LAYER [REMOTE] button to select the Remote Layer. When the Pro Tools Remote Layer is selected, the 02R96's control surface controls Pro Tools, not the 02R96. In order to control the 02R96, you need to select an Input Channel Layer or the Master Layer. Audio mixing on the other Layers and Automix continues while the Pro Tools Layer is selected. 02R96-Owner's Manual