Yamaha 02R96 Owner's Manual - Page 194
Flip Mode, Press the FADER MODE [FADER] or [AUX] button.
View all Yamaha 02R96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
Flip Mode 181 Flip Mode In Flip mode, the faders, Encoders, and [ON] buttons can be used to control sends, as shown in the following table. Control Normal mode Flip mode Fader Encoder Encoder push-switches [ON] button Channel level Send level Channel pan/send level Send pan Encoder mode is Pan, inactive Encoder mode is Send level, Send pre/post Send pre/post Channel mute Send mute 1 Press the FADER MODE [FADER] or [AUX] button. The FADER MODE [FADER] and [AUX] button indicators flash alternately, and both the ENCODER MODE [PAN] (PAN) and [AUX] (SEND LEVEL) button indicators light up. The SELECT ASSIGN section of the display shows "FLIP." 2 Use the AUX SELECT [AUX 1-5] (SEND A-E) buttons to select the sends. The button indicator of the selected send lights up. 3 Use the faders, Encoders, and [ON] buttons to control the currently selected send. For stereo aux input channels (i.e., channels with two send panpots), use the ENCODER MODE [PAN] (PAN) button to toggle between the left and right panpots, and pan with the Encoder. When the left panpot is active, the ENCODER MODE [PAN] (PAN) button indicator is lit continuously. When the right panpot is active, the ENCODER MODE [PAN] (PAN) button indicator flashes. 02R96-Owner's Manual