Yamaha 02R96 Owner's Manual - Page 84
Input Channel Surround s
View all Yamaha 02R96 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Using Surround Pan 71 You can move the surround pan directly to one of the speaker icons, including the box icons without speakers, by selecting its icon, and then pressing [ENTER]. 3 Use the cursor buttons to select the parameters, and use the Parameter wheel, INC/DEC buttons, and [ENTER] button to set them. LFE: This sets the level of the LFE (Low Frequency Effects) Channel (5.1 mode only). DIV (divergence): This determines how the Center signal is fed to the Left, Right, and Center channels. When set to 0, the Center signal is fed only to the Left and Right channels (i.e., Phantom Center). When set to 50, the Center signal is fed equally to the Left, Right, and Center channels. When set to 100, it's fed to only the Center channel (i.e., Real Center). Patterns: These buttons are used to select the seven patterns that determine how the surround pan moves by the Parameter wheel and INC/DEC buttons. FAST: This sets the speed of surround pan control when using the Parameter wheel and INC/DEC buttons. WIDTH: This sets the left-to-right width of the selected pattern. DEPTH: This sets the front-to-rear depth of the selected pattern. WIDTH OFFSET: This can be used to offset the left-to-right direction of the selected pattern. DEPTH OFFSET: This can be used to offset the front-to-rear direction of the selected pattern. ST LINK: This can be used to link the surround pan parameters of the currently selected Input Channel and its horizontal or vertical partner regardless of whether they are paired. PATTERN: When Input Channels are linked, the seven patterns selectable here determine how the linked surround pan moves by the Parameter wheel and INC/DEC buttons. Input Channel Surround Pages Surround pan positions can be viewed and set on the Surround pages. 1 Use the SELECTED CHANNEL PAN/SURROUND [DISPLAY] button to select the Input Channel Surround pages. The Surround parameters for the 56 Input Channels are arranged into three pages. The Input Channel 1-24 Surround page is shown below. The layout of the other two pages is the same. 2 Use the cursor buttons to select the Surround parameters, and use the Parameter wheel and INC/DEC buttons to set them. Input Channels can also be selected by using the LAYER buttons and [SEL] buttons. The graph for the currently selected Input Channel displays a small square, which indicates the current position of the Joystick. 02R96-Owner's Manual