Cisco AIR-LAP1252AG-A-K9 Software Configuration Guide - Page 144
Setting a Session-Based WEP Key Timeout, Submit + Restart, Submit
UPC - 882658140716
View all Cisco AIR-LAP1252AG-A-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
Setting Up EAP Authentication Chapter 4 Security Setup Step 7 To save your changes and apply them immediately, click the Submit + Restart button. Tip To save your changes and apply them later, click Submit. When you are ready to implement the changes, select System Configuration > Service Control and click Restart. Note Restarting the service clears the Logged-in User Report, refreshes the Max Sessions counter, and temporarily interrupts all Cisco Secure ACS services. Setting a Session-Based WEP Key Timeout You can set a timeout value for the session-based WEP key. When the timeout value elapses, the server issues a new dynamic WEP key for authenticated client devices. Note If you enable TKIP on the access point, you do not need to set up a session-based WEP key timeout. You can use both TKIP and a session key timeout, but these features provide redundant protection. You should consider several factors when determining the best session key timeout value for your wireless network. Consult Product Bulletin 1515: Cisco Wireless LAN Security Bulletin for guidelines on selecting timeout values. Use this URL to browse to Product Bulletin 1515: http://www.cisco.com/warp/public/cc/pd/witc/ao350ap/prodlit/1515_pp.htm Follow these steps to set a timeout value for session-based WEP keys: Step 1 Step 2 On the ACS main menu, click Group Setup. In the Group drop-down menu, select the group for which you want to modify the WEP key/session timeout. The Default group is usually the group you need to modify. 4-26 Cisco Aironet 1200 Series Access Point Software Configuration Guide OL-2159-03