Cisco AIR-LAP1252AG-A-K9 Software Configuration Guide - Page 93
DHCP Client Identifier Value, DHCP Class Identifier
UPC - 882658140716
View all Cisco AIR-LAP1252AG-A-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Chapter 3 Configuration Server Setup DHCP Client Identifier Value Use this setting to include a unique identifier in the access point's DHCP request packet. This field contains the access point's MAC address by default. If you select Other - Non Hardware from the DHCP Client Identifier Type pull-down menu, you can enter up to 255 alphanumeric characters. If you select any other option from the DHCP Client Identifier Type pull-down menu, you can enter up to 12 hexadecimal characters. Hexadecimal characters include the numbers 0 through 9 and the letters A through F. DHCP Class Identifier Your DHCP server can be set up to send responses according to the group to which a device belongs. Use this field to enter the access point's group name. The DHCP server uses the group name to determine the response to send to the access point. The access point's DHCP class identifier is a vendor class identifier. Entering Web Server Settings and Setting Up Access Point Help You use the Web Server Setup page to enable browsing to the web-based management system, specify the location of the access point Help files, and enter settings for a custom-tailored web system for access point management. Figure 3-21 shows the Web Server Setup page: Figure 3-21 Web Server Setup Page OL-2159-03 Cisco Aironet 1200 Series Access Point Software Configuration Guide 3-55