Cisco AIR-LAP1252AG-A-K9 Software Configuration Guide - Page 67

Chapter 3 Configuration Radio Configuration Restrict Searched Channels Click Restrict Searched Channels to limit the channels that the access point scans when Search for less-congested radio channel is enabled. The AP Radio Restrict Searched Channels page appears when you click Restrict Searched Channels. Figure 3-14 shows the AP Radio Restrict Searched Channels page for the internal radio. Figure 3-14 AP Radio Restrict Searched Channels Page for the Internal Radio The page lists all the channels in the access point's regulatory domain. Click the Search check boxes beside the channels to include channels in the scan for less-congested channels. All the channels are included in the scan by default. Receive Antenna and Transmit Antenna Pull-down menus for the receive and transmit antennas offer three options: • Diversity-This default setting tells the access point to use the antenna that receives the best signal. If your access point has two fixed (non-removeable) antennas, you should use this setting for both receive and transmit. • Right-If your access point has removeable antennas and you install a high-gain antenna on the access point's right connector, you should use this setting for both receive and transmit. When you look at the access point's back panel, the right antenna is on the right. OL-2159-03 Cisco Aironet 1200 Series Access Point Software Configuration Guide 3-29