Cisco AIR-LAP1252AG-A-K9 Software Configuration Guide - Page 194
Distributing Firmware
UPC - 882658140716
View all Cisco AIR-LAP1252AG-A-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
Distributing Firmware Chapter 6 Managing Firmware and Configurations Distributing Firmware Use the Distribute Firmware page to distribute the access point's firmware to other Cisco Aironet access points. Figure 6-7 shows the Distribute Firmware page. The access point sends its firmware to all the access points on your network that: • Are running access point firmware version 11.40 or newer • Can detect the IP multicast query issued by the distributing access point (network devices such as routers can block multicast messages) • Have their web servers enabled for external browsing (see the "Entering Web Server Settings and Setting Up Access Point Help" section on page 3-55) • Have the same HTTP port setting as the distributing access point (the HTTP port setting is on the Web Server Setup page) • Have a Default Gateway setting other than the default setting, which is 255.255.255.255 (the Default Gateway setting is on the Express Setup and Routing Setup pages) • If they have User Manager enabled, contain in their User Lists a user with the same user name, password, and capabilities as the user performing the distribution (the person logged in on the distributing access point) Follow the steps in the "Limiting Distributions" section on page 6-11 to limit the firmware distribution to certain access points. Figure 6-7 Distribute Firmware Page Cisco Aironet 1200 Series Access Point Software Configuration Guide 6-8 OL-2159-03