Dell PowerConnect B - MLXe 16 Hardware Installation Guide - Page 150
Performing a coherence check without a reload, Displaying image versions, Using the show flash command
View all Dell PowerConnect B - MLXe 16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
6 Displaying image versions Performing a coherence check without a reload Enter the reload-check command to perform a coherence check without performing a reload, as shown in the following example: PowerConnect# reload-check Checking for coherence... Warning: The new LP PBIF-8X10 FPGA will not be compatible with the new LP 3 application. Warning: The new LP XPP-8X10 FPGA will not be compatible with the new LP 3 application. Done. PowerConnect# If interface modules are in interactive mode, or the system is unable to communicate with the interface modules, the system sends the following warning message. Can't check LP for coherence. Error messages generated by the coherence check The following error messages are generated if a coherence check fails: Warning: Image coherence check skipped due to insufficient info: Invalid active LP # flash images in Primary/Secondary. Warning: Image coherence check skipped due to insufficient info: Invalid active MP flash images in Primary/Secondary. Warning: Image coherence ckeck skipped due to insufficient info: MP/LP not booting from flash. Warning: Image coherence check skipped due to failure to communiate with LP. If interface modules are in interactive mode, or the system is unable to communicate with the interface modules, the system sends the following warning message. Can't check LP for coherence. Displaying image versions The following sections describe how to display software image version information for PowerConnect B-MLXe routers, using the show flash or show version commands. Using the show flash command You can display the images stored in flash memory using the show flash command. NOTE This example is for illustration only and may not reflect current image version information. Output from the show flash command resembles this example. PowerConnect# show flash 138 PowerConnect B-MLXe Hardware Installation Guide 53-1002111-01