Dell PowerConnect B - MLXe 16 Hardware Installation Guide - Page 36
Power precautions, Installation precautions
View all Dell PowerConnect B - MLXe 16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
2 Installation precautions Power precautions CAUTION Use a separate branch circuit for each AC power cord for redundancy in case one of the circuits fails. DANGER Make sure to choose the appropriate circuit device, depending on the number of AC power supplies installed in the router. DANGER Disconnect the power cord from all power sources to completely remove power from the router. DANGER Make sure that the power source circuits are properly grounded, then use the power cord supplied with the router to connect it to the power source. DANGER If the installation requires a different power cord than the one supplied with the router, make sure you use a power cord displaying the mark of the safety agency that defines the regulations for power cords in your country. The mark is your assurance that the power cord can be used safely with the router. DANGER Make sure the rack or cabinet housing the router is adequately secured to prevent it from becoming unstable or falling over. DANGER Mount the routers you install in a rack or cabinet as low as possible. Place the heaviest router at the bottom and progressively place lighter routers above. 24 PowerConnect B-MLXe Hardware Installation Guide 53-1002111-01