Dell PowerConnect B - MLXe 16 Hardware Installation Guide - Page 28
Table 11
View all Dell PowerConnect B - MLXe 16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
1 Router modules TABLE 11 Switch fabric modules Part number Description NI-X-4-HSF NI-X-16-8-HSF High speed switch fabric module for 4-slot routers High speed switch fabric module for 8- and 16-slot routers Switch fabric modules switch packets from one interface module to another. PowerConnect B-MLXe routers can be configured with multiple switch fabric modules as described here: • 4-slot router: Accommodates three switch fabric modules (two required and one redundant) for a fully-loaded system. Ships with two switch fabric modules. You must purchase an additional switch fabric module to equip your router for redundancy. • 8-slot router: Accommodates three switch fabric modules (two required and one redundant) for a fully-loaded system. Ships with two switch fabric modules. You must purchase an additional switch fabric module to equip your router for redundancy. • 16-slot router: Accommodates four switch fabric modules (three required and one redundant) for a fully-loaded system. Ships with three switch fabric modules. You must purchase an additional switch fabric module to equip your router for redundancy. NOTE PowerConnect B-MLXe router switch fabric modules are dedicated, which means that they function properly in PowerConnect B-MLXe routers only. If you attempt to install a PowerConnect B-MLXe router switch fabric module in another Dell device or a switch fabric module intended for another Dell device in a PowerConnect B-MLXe router, the router and switch fabric module will not function properly. Figure 10 shows the front panel of a switch fabric module. FIGURE 10 Switch fabric module front panel l BI-SWF Pwr Active The front panel contains two LEDs, as described in Table 12. TABLE 12 LED Switch fabric module LEDs Position State Meaning Pwr Active Above Active LED Below Pwr LED On The module is receiving power. Off The module is not receiving power. On The switch fabric is active and ready to switch user packets. Off for an extended period The switch fabric is not active and cannot switch user packets. 16 PowerConnect B-MLXe Hardware Installation Guide 53-1002111-01