Dell PowerConnect B - MLXe 16 Hardware Installation Guide - Page 64
Connecting AC power,
View all Dell PowerConnect B - MLXe 16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
2 Installing a PowerConnect B-MLXe-8 router 1. Remove the power supply slot blank. 2. Remove the power supply from the packaging. 3. Insert the power supply into the slot and slide it along the guides on each side of the slot. Refer to Figure 36. NOTE Empty power supply slots must be covered with slot blanks. CAUTION Carefully follow the mechanical guides on each side of the power supply slot and make sure the power supply is properly inserted in the guides. Never insert the power supply upside down. FIGURE 36 Installing a power supply in a PowerConnect B-MLXe-8 router 4. Push the power supply front panel into the router until it engages the backplane connector. 5. Ensure the captive pin is engaged. For information about connecting power to the router, refer to "Connecting AC power" on page 52. Connecting AC power AC power is supplied through the power cord that is connected to the AC power supply in the router. 52 PowerConnect B-MLXe Hardware Installation Guide 53-1002111-01