Dell PowerConnect B - MLXe 16 Hardware Installation Guide - Page 25
port 10/100/1000 Ethernet interface module, NI-MLX-1Gx48-T-A interface module, TABLE 9
View all Dell PowerConnect B - MLXe 16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Router modules 1 Table 9 lists SFP-compliant transceivers available from Dell. TABLE 9 SFP-compliant transceivers available from Dell Part number Description E1MG-TX E1MG-SX-OM E1MG-LX E1MG-LX-OM E1MG-LHA-OM E1MG-100FX-OM SFP Copper, RJ45 connector (supported at 1000 Mbps speeds only). 1000Base-SX SFP optic with Digital Optical Monitoring. 1000Base-LX SFP optic, single-mode fiber, LC connector. 1000Base-LX SFP optic with Digital Optical Monitoring. 1000Base-LHA SFP optic, single-mode fiber, LC connector. For ranges up to 80 km. 100Base-FX SFP optic multi-mode fiber, LC connector. 24-port 10/100/1000 Ethernet interface module Figure 8 shows the front panel of the 24-port 10/100/1000 Ethernet RJ45 module. FIGURE 8 24-port 10/100/1000 copper Ethernet module front panel The front panel includes the following features: • LEDs • Twenty 10/100/1000 copper Ethernet ports. Table 10 describes the 24-port 10/100/1000 Ethernet module LEDs. TABLE 10 LED 24-port 10/100/1000 Ethernet module LEDs Position State Meaning Link or Active Underneath the ports. The top port LED is on the left side, the bottom port LED is on the right side. On (solid) Blinking Off A link is established with the remote port (with no traffic). The port is transmitting and receiving packets. A link is not established with the remote port and no traffic is being passed. NI-MLX-1Gx48-T-A interface module Figure 9 shows the front panel of the NI-MLX-1Gx48-T-A interface module. PowerConnect B-MLXe Hardware Installation Guide 13 53-1002111-01