Dell PowerConnect B - MLXe 16 Hardware Installation Guide - Page 68
these steps.
View all Dell PowerConnect B - MLXe 16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
2 Installing a PowerConnect B-MLXe-16 router FIGURE 38 Mounting the PowerConnect B-MLXe-16 router in a rack 1 2 1 Front-mount configuration 2 Mid-mount configuration 4. Slide the router down so that the mounting screw heads are in the narrow portion of the keyhole slots. 5. Tighten the screws to secure the router in place. For extra support, use additional screws. NOTE For better grounding of the router to the rack, attach the router using star washers. You should also use star washers with any single-hole grounding lugs to keep the lugs from rotating. NOTE When making the primary ground connection, use a star washer to prevent lug rotation. Repeat step 2 through step 5 to mount each router in the rack. Cabinet installation steps You can also install your device in a 4-post rack or cabinet, using a Cabinet Rack Mount Kit, which must be ordered separately (part number 326TY). To install your router in a closed cabinet, follow these steps. 1. Remove the sides of the cabinet to allow access to the cabinet mounting posts. 2. Remove the factory-installed mounting brackets. 3. Attach the cabinet rack mounting brackets to the front of the device. Refer to Figure 39. 56 PowerConnect B-MLXe Hardware Installation Guide 53-1002111-01