Dell PowerConnect J-8208 Hardware Guide - Page 107
Pallet Fastener
View all Dell PowerConnect J-8208 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Figure 32: Pallet Fastener Chapter 8: Installing the Switch 4. Carefully slice open the tape that holds the top of the cardboard box closed and open the top of the box. 5. Remove the cardboard accessory box from the center of the foam padding. 6. Remove the foam padding from the top of the box. 7. Slide the cardboard box off the pallet. 8. Remove the plastic cover from the switch chassis. 9. Use a 7/16-in. or 11-mm open-end or socket wrench to remove the four sets of bracket bolts that secure the chassis to the shipping pallet. 10. Unpack the accessory box and lay out the contents so that they are ready for use. 11. Verify that your order includes all appropriate parts. See "Parts Inventory (Packing List) for a J-EX8208 Switch" on page 92. 12. Store the brackets and bolts inside the accessory box. 13. Save the shipping box, pallet, and packing materials in case you need to move or ship the switch at a later time. 91