Dell PowerConnect J-8208 Hardware Guide - Page 149
Powering On a J-EX8200 Switch, Connecting the Power Supply Cord to a J-EX8200 Switch
View all Dell PowerConnect J-8208 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Chapter 10: Connecting the Switch Figure 65: Connecting the Power Supply Cord to a J-EX8200 Switch Related • Powering On a J-EX8200 Switch on page 133 Documentation • AC Power Supply in a J-EX8200 Switch on page 34 • AC Power Supply LEDs in a J-EX8200 Switch on page 37 Powering On a J-EX8200 Switch Before you power on the switch, ensure that: • You have installed all required switch components. • You have installed the required number of power supplies to support redundant operation for the switch configuration (see "Calculating Power Requirements for a J-EX8208 Switch" on page 79. • You understand how to protect the switch from electrostatic damage. See "Prevention of Electrostatic Discharge Damage on J-EX Series Switches" on page 236. Ensure that you have the following parts and tools available to power on the switch: • An electrostatic discharge (ESD) grounding strap. • An external management device such as a PC. • A cable to connect the external management device to the master Switch Fabric and Routing Engine (SRE) module's console (CON) port or management (MGMT) port in a J-EX8208 switch. For connecting a management device to the console port, see "Connecting a J-EX Series Switch to a Management Console" on page 135. For connecting a management 133