Dell PowerConnect J-8208 Hardware Guide - Page 41
Management Port LEDs in J-EX8200 Switches, Switch Fabric (SF) Module in a J-EX8208 Switch
View all Dell PowerConnect J-8208 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Chapter 2: Component Descriptions Management Port LEDs in J-EX8200 Switches The management port on J-EX8200 switches has two LEDs that indicate link/activity and port status (see Figure 9 on page 25). The management port is set to full-duplex and the speed is set to 100 Mbps. Figure 9: LEDs on the Management Port on a J-EX8200 Switch Table 14 on page 25 describes the Link/Activity LED. Table 14: Link/Activity LED on the Management Port on J-EX8200 Switches LED Color State and Description Link/Activity Green • Blinking-The port and the link are active, and there is link activity. • On steadily-The port and the link are active, but there is no link activity. • Off-The port is not active. Table 15 on page 25 describes the Status LED (administrative status). Table 15: Status LED on the Management Port on J-EX8200 Switches LED Color State and Description Status Green • On steadily-Administrative status is enabled. • Off-Administrative status is disabled. Related • See Switch Fabric and Routing Engine (SRE) Module in a J-EX8208 Switch on page 22 Documentation for port location. • Connecting a J-EX Series Switch to a Network for Out-of-Band Management on page 140 Switch Fabric (SF) Module in a J-EX8208 Switch The Switch Fabric (SF) module provides switching functionality. See Figure 10 on page 26. 25