Dell PowerConnect J-8208 Hardware Guide - Page 36
Chassis Status LEDs in a J-EX8200 Switch, Chassis Status LEDs
View all Dell PowerConnect J-8208 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Dell PowerConnect J-Series J-EX8208 Ethernet Switch Hardware Guide Chassis Status LEDs in a J-EX8200 Switch The top front of the chassis of a J-EX8200 switch has three LEDs on the right side of the LCD panel. See Figure 6 on page 20. Figure 6: Chassis Status LEDs Table 11 on page 20 describes the chassis status LEDs in a J-EX8200 switch, their colors and states, and the status they indicate. You can view the colors of the three LEDs remotely through the CLI by issuing the operational mode command show chassis lcd. Table 11: Chassis Status LEDs in a J-EX8200 Switch LED Label (Description) Color State and Description ALM (Alarm) Unlit No alarm. Red Major alarm. Yellow Minor alarm. SYS (System) Unlit Switch is powered off. Yellow One or more component failures are generating one or more alarms. Green Switch is operating normally. MST (Master) Unlit Switch is powered off. Green Master Routing Engine is operational. A major alarm (red) indicates a critical error condition that requires immediate action. A minor alarm (yellow) indicates a noncritical condition that requires monitoring or maintenance. A minor alarm that is left unchecked might cause interruption in service or performance degradation. All three LEDs can be lit simultaneously. Related • LCD Panel in a J-EX8200 Switch on page 15 Documentation 20