Dell PowerConnect J-8208 Hardware Guide - Page 49

Chapter 2: Component Descriptions Table 18: Network Port LEDs on Line Cards in a J-EX8200 Switch-Link/Activity LED LED Color State and Description Link/Activity Green • On steadily-The port and the link are active, but there is no link activity. • Blinking-The port and the link are active, and there is link activity. • Off-The port is not active. The LEDs labeled Status in Figure 18 on page 32, Figure 19 on page 32, and Figure 20 on page 32 indicate the status of one of the three port parameters. The port parameters are administrative status, duplex mode, and speed. Table 19 on page 33 describes the Status LED. From the Idle menu of the LCD, use the Enter button on the LCD panel to toggle between the ADM, DPX, and SPD indicators. Table 19: Network Port LEDs on Line Cards in a J-EX8200 Switch-Status LED LED LCD Indicator State, Color, and Description Status LED: ADM LED: DPX LED: SPD Indicates the administrative status (enabled or disabled). The status indicators are: • Green-Administrative status enabled. • Unlit-Administrative status disabled. Indicates the duplex mode. The status indicators are: • Green-Port is set to full-duplex mode. • Unlit-Port is not set to full-duplex mode. Indicates the speed. The speed indicators are different in the line cards. The speed indicators for 8-port SFP+ line cards are: • Unlit-Less than 10 Gbps • Green-10 Gbps The speed indicators for 48-port SFP line cards are: • Unlit-Less than 1 Gbps • Green-1 Gbps The speed indicators for 48-port RJ-45 line cards are: • Unlit-10 Mbps • Green-Blinking-100 Mbps • Green-On steadily-1000 Mbps Related • 8-port SFP+ Line Card in a J-EX8200 Switch on page 27 Documentation • 48-port SFP Line Card in a J-EX8200 Switch on page 28 • 48-port RJ-45 Line Card in a J-EX8200 Switch on page 29 33