Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 1010

Example (queue) OS10(config)# policy-map type queuing pmap1 OS10(config-pmap-queuing)# class cmap1 OS10(config-pmap-c-que)# queue-limit queue-len 100 OS10(config-pmap-c-que)# queue-limit thresh-mode static 50 Supported Releases 10.3.0E or later queue bandwidth Configures a bandwidth for a given queue on interface. Syntax queue queue-number bandwidth bandwidth-percentage Parameters • queue-number - Enter the queue number. • bandwidth-percentage - Enter the percentage of bandwidth. Default Not configured Command Mode POLICY-MAP-CLASS-MAP Usage Information The no version of this command removes the bandwidth from the queue. Example None Supported Releases 10.4.0E(R1) or later queue qos-group Configures a dot1p traffic class to a queue. Syntax queue number [qos-group dot1p-values] Parameters • queue number - Enter the traffic single value queue ID, from 0 to 7. • qos-group dot1p-values - (Optional) Enter either single, comma-delimited, or a hyphenated range of dot1p values, from 0 to 7. Default Command Mode Usage Information Example 0 TRUST-MAP If the trust map does not define traffic class values to a queue, those flows map to the default queue 0. If some of the traffic class values are already mapped to an existing queue, you see an error. The no version of this command returns the value to the default. OS10(conf-tmap-tc-queue-qos)# queue 2 qos-group 5 Supported Releases 10.3.0E or later random-detect (interface) Assigns a WRED profile to the specified interface. Syntax random-detect wred-profile 1010 Quality of service