Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 486

• denied-routes - (Optional) Displays the configured IPv6 denied routes. Default Command Mode Usage Information Example Not configured EXEC None OS10# show ip bgp ipv6 unicast summary BGP router identifier 80.1.1.1 local AS number 102 Neighbor AS MsgRcvd MsgSent Up/Down State/Pfx 80.1.1.2 800 8 4 00:01:10 5 Supported Releases 10.3.0E or later show ip bgp neighbors Displays information that BGP neighbors exchange. Syntax show ip bgp [vrf vrf-name] neighbors ip-address [denied-routes] Parameters • vrf vrf-name - (OPTIONAL) Enter vrf and then the name of the VRF to view information exchanged between BGP neighbors corresponding to that VRF • ip-address - Enter the IP address for a specific neighbor • denied-routes - (Optional) Displays the list of routes denied by policy • advertised-routes-Displays the routes advertised to a neighbor • dampened-routes-Displays the suppressed routes received from a neighbor • flap-statistics-Displays the route's flap statistics received from a neighbor • received-routes-Displays the routes received from a neighbor • routes-Displays routes learned from a neighbor Default Command Mode Usage Information Not configured EXEC • BGP neighbor - Displays the BGP neighbor address and its AS number. The last phrase in the line indicates whether the link between the BGP router and its neighbor is an external or internal one. If they are located in the same AS, the link is internal; otherwise the link is external. • BGP version - Displays the BGP version, always version 4, and the remote router ID. • BGP state - Displays the neighbor's BGP state and the amount of time in hours:minutes: seconds it has been in that state. • Last read - Displays the information included in the last read: - Last read is the time in hours:minutes:seconds that the router read a message from its neighbor. - Hold time is the number of seconds configured between messages from its neighbor. - Keepalive interval is the number of seconds between keepalive messages to help ensure that the TCP session is still alive. • Received messages - Displays the number of BGP messages received, the number of notifications or error messages, and the number of messages waiting in a queue for processing. • Sent messages - Displays the number of BGP messages sent, the number of notifications or error messages, and the number of messages waiting in a queue for processing. • Description - Displays the descriptive name configured for the BGP neighbor. This field is displayed only when the description is configured. • Local host - Displays the peering address of the local router and the TCP port number. 486 Layer 3