Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 290

Table 9. 802.1x organizationally-specific TLVs (Type - 127, OUI - 00-80-C2) TLV Subtype Link aggregation 7 Port VLAN ID 1 Protocol identity 4 Description Indicates whether the link associated with the port on which the LLDPDU is transmitted is aggregated. Also indicates whether the link is currently aggregated and provides the aggregated port identifier if the link is aggregated. Untagged VLAN to which a port belongs. Not supported. Table 10. 802.3 organizationally-specific TLVs (Type - 127, OUI - 00-12-0F) TLV Subtype MAC/PHY configuration/status 1 Power via MDI 2 Maximum frame size 4 Description Indicates duplex and bit rate capability and the current duplex and bit rate settings of the sending device. Also indicates whether the current settings are due to autonegotiation or manual configuration. Not supported. Maximum frame size capability of the MAC and PHY. Table 11. iDRAC organizationally-specific TLVs; Subtypes used in iDRAC custom TLVs (Type - 127, OUI - 0xF8-0xB1-0x56) TLV Originator Subtype 1 Description Indicates the iDRAC string that is used as originator. This string enables external switches to easily identify iDRAC LLDP PDUs. Port type 2 Following are the applicable port types: 1 iDRAC port (dedicated) 2 NIC port 3 iDRAC and NIC port (shared) Port FQDD 3 Server service tag 4 Server model name 5 Server slot number 6 Chassis service tag 7 Port number that uniquely identifies a NIC port within a server. Service tag ID of the server. Model name of the server. For example, PowerEdge FC640. Slot number of the server. For example, 1, 2, 3, 1a, 1b, and so on. Service tag ID of the chassis. (Applicable only to blade servers.) 290 Layer 2