Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 232

Configuration guidelines When configuring different modes; for example, F_Port, NPG, or FSB, consider the following: • F_Port, NPG, and FSB modes are mutually exclusive. You can enable only one at a time. • You can enable the mode-specific commands only after enabling the specific feature. • Before you disable the F_Port and NPG features, delete the mode-specific configurations. When you disable FSB, the system automatically removes the configurations. F_Port commands The following commands are supported on F_Port mode: fc alias Creates an FC alias. After creating the alias, add members to the FC alias. An FC alias can have a maximum of 255 unique members. Syntax Parameters Defaults Command Mode Usage Information fc alias alias-name alias-name - Enter a name for the FC alias. Not configured CONFIGURATION The no version of this command deletes the FC alias. To delete an FC alias, first remove it from the FC zone. Example OS10(config)# fc alias test OS10(config-fc-alias-test)# member wwn 21:00:00:24:ff:7b:f5:c9 OS10(config-fc-alias-test)# member wwn 20:25:78:2b:cb:6f:65:57 Supported Releases 10.3.1E or later fc zone Creates an FC zone and adds members to the zone. An FC zone can have a maximum of 255 unique members. Syntax fc zone zone-name Parameters zone-name - Enter a name for the zone. Defaults Not configured Command Mode CONFIGURATION Usage Information The no version of this command deletes the FC zone. To delete an FC zone, first remove it from the FC zoneset. Example OS10(config)# fc zone hba1 OS10(config-fc-zone-hba1)# member wwn 10:00:00:90:fa:b8:22:19 OS10(config-fc-zone-hba1)# member wwn 21:00:00:24:ff:7b:f5:c8 Supported Releases 10.3.1E or later 232 Fibre Channel