Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 1014

set cos Sets a cost of service (CoS) value to mark L2 802.1p (dot1p) packets. Syntax set cos cos-value Parameters cos-value - Enter a CoS value, from 0 to 7. Default Not configured Command Mode POLICY-MAP-CLASS-MAP Usage Information You cannot enter two set statements with the same action-type. If you enter two set statements with the same action-type, the second statement overwrites the first. When class-map type is qos, the qos-group corresponds to data queues 0 to 7. Example OS10(conf-pmap-c-qos)# set cos 6 Supported Releases 10.2.0E or later set dscp Sets the drop precedence for incoming packets based on their DSCP value and color map profile. Syntax Parameters Default Command Mode Usage Information Example set dscp dscp-value dscp-value - Enter a DSCP value, from 0 to 63. Not configured POLICY-MAP-CLASS-MAP When class-map type is qos, the qos-group corresponds to data queues 0 to 7. OS10(conf-pmap-c-qos)# set dscp 10 Supported Releases 10.2.0E or later set qos-group Configures marking for the QoS-group queues. Syntax Parameters Default Command Mode Usage Information Example set qos-group queue-number queue-number - Enter a queue number, from 0 to 7. Not configured POLICY-MAP-CLASS-MAP This command supports only the qos or control-plane ingress policy type. When the class-map type is control-plane, the qos-group corresponds to CPU queues 0 to 11. When the class-map type is qos, the qosgroup corresponds to data queues 0 to 7. OS10(conf-pmap-c-qos)# set qos-group 7 1014 Quality of service