Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 704

Usage information Example The untagged VLAN ID is used internally for all untagged member interfaces that belong to virtual networks. You cannot use the reserved untagged VLAN ID for a simple VLAN bridge or for tagged traffic on member interfaces of virtual networks. The no version of this command removes the configured value. OS10(config)# virtual-network untagged-vlan 10 Supported releases 10.4.2.0 or later vxlan-vni Assigns a VXLAN ID to a virtual network. Syntax vxlan-vni vni Parameters vni Enter the VXLAN ID for a virtual network, from 1 to 16,777,215. Default Command mode Usage information Example Not configured VIRTUAL-NETWORK This command associates a VXLAN ID number with a virtual network. The no version of this command removes the configured ID. OS10(conf-vn-100)# vxlan-vni 100 OS10(config-vn-vxlan-vni)# Supported releases 10.4.2.0 or later VXLAN MAC commands clear mac address-table dynamic nve remote-vtep Clears all MAC addresses learned from a remote VTEP. Syntax Parameters clear mac address-table dynamic nve remote-vtep ip-address remote-vtep ip-address Clear MAC addresses learned from the specified remote VTEP. Default Command mode Usage information Example Not configured EXEC To display the MAC addresses learned from a remote VTEP, use the show mac address-table nve remote-vtep command. Use this command to delete all MAC address entries learned from a remote VTEP. OS10# clear mac address-table dynamic nve remote-vtep 32.1.1.1 Supported releases 10.4.2.0 or later 704 VXLAN