Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 329

Default Command Mode Usage Information Example System MAC address MULTIPLE-SPANNING-TREE By default, the MST protocol assigns the system MAC address as the region name. Two MST devices within the same region must share the same region name, including matching case. OS10(conf-mst)# name my-mst-region Supported Releases 10.2.0E or later revision Configures a revision number for the MSTP configuration. Syntax revision number Parameters number - Enter a revision number for the MSTP configuration, from 0 to 65535. Default 0 Command Mode MULTIPLE-SPANNING-TREE Usage Information To have a bridge in the same MST region as another, the default values for the revision number must match on all Dell EMC hardware devices. If there are non-Dell EMC devices, ensure the revision number value matches on all the devices. For more information, see Non-Dell Hardware. Example OS10(conf-mst)# revision 10 Supported Releases 10.2.0E or later spanning-tree bpdufilter Enables or disables BPDU filtering on an interface. Syntax Parameters spanning-tree bpdufilter {enable | disable} • enable - Enables the BPDU filter on an interface. • disable - Disables the BPDU filter on an interface. Default Command Mode Usage Information Example Disabled INTERFACE Use the enable parameter to enable BPDU filtering. OS10(conf-if-eth1/1/4)# spanning-tree bpdufilter enable Supported Releases 10.2.0E or later spanning-tree bpduguard Enables or disables the BPDU guard on an interface. Syntax spanning-tree bpduguard {enable | disable} Layer 2 329