Dell PowerSwitch S4128F-ON OS10 Enterprise Edition User Guide Release 10.4.3.0 - Page 116

an encrypted cypher-text password. In either case, the password stores in the configuration in an encrypted form and displays as encrypted in the show running-config snmp output. A localized authentication or privacy key is more complex and provides greater privacy protection. To display the localized authentication and privacy keys in an SNMPv3 user configuration, use the show runningconfiguration snmp command. To limit user access to the SNMP agent on the switch, enter an access acl-name value. In IPv6 ACLs, SNMP supports only IPv6 and UDP types. TCP, ICMP, and port rules are not supported. The no version of this command removes a user from the SNMP group. Example (Encrypted OS10(config)# snmp-server user privuser v3group v3 auth md5 passwords) 9fc53d9d908118b2804fe80e3ba8763d priv des d0452401a8c3ce42804fe80e3ba8763d Example (Plain-text OS10(config)# snmp-server user authuser v3group v3 auth md5 authpasswd passwords) Example (Remote user) OS10(config)# snmp-server user n3user ngroup remote 172.31.1.3 udp-port 5009 3 auth md5 authpasswd Supported Releases 10.4.2.0 or later snmp-server view Configures an SNMPv3 view. Syntax Parameters snmp-server view view-name oid-tree [included | excluded] • view-name - Enter the name of a read-only, read-write, or notify view. A maximum of 32 characters. • oid-tree - Enter the SNMP object ID at which the view starts in 12-octet dotted-decimal format. • included - (Optional) Include the MIB family in the view. • excluded - (Optional) Exclude the MIB family from the view. Defaults Command Mode Usage Information Not configured CONFIGURATION The oid-tree value specifies the OID in the MIB tree hierarchy at which a view starts. Enter included or excluded to include or exclude the remaining part of the MIB sub-tree contents in the view. The no version of this command removes an SNMPv3 view. Example OS10(config)# snmp-server view readview 1.3.6.5 excluded Supported Releases 10.4.2.0 or later snmp-server vrf Configures an SNMP agent to receive SNMP traps for the management VRF instance. Syntax snmp-server vrf management 116 System management